Morimoto LightingReviews of morimotohid.com

The 4Banger fog lights for my 4runner have been great, really light up the road and cover major blind spots the stock lights left. My wife and son just completed a 2500 mi road trip and the drivers side light mounting bracket broke. Reached out to customer support and they replaced it immediately. Awesome product with great support. Only concern is the molded plastic bracket seems a little weak at the mounting tabs since it broke on the trip, could have been road debris or a small animal strike though from driving the Alcan at night.

I purchased the Morimoto 2 banger amber ditch light kit for my Bronco. Couldn’t be happier.. the brackets are no joke! Solid construction and thick metal. The wiring harness made install a breeze. The lights look awesome and perform just as well. The only critique I have is the rocker switch that came with the light duty wiring harness. I didn’t care for the included switch so I replaced it with my own -a nicer style lighted push button type. Other than that very happy with my purchase.

Customer service reached out and they have made things right. I guess it just takes a review and talking to the right people. I will use them for my next lighting purchase paid almost 1700 for headlights for my 2016 gmc 2500. They lasted exactly 3 months before they went out. After it went out it was like 2 weeks or more to get a replacement. Then they would not pay for labor to install the lights. So that is twice i had to pay for labor to have the headlights installed. After i paid labor time to do the diagnostic work they require to have a warranty claim. Then they would ouly send the side that went out even though they were replaced at the same time. So now i have one brand new light and one used light. Their product is cheaply made and cost an arm and a leg. I do not recommend this company.

2019 Jeep Grand Cherokee trailhawk I installed the Gen. 2. The non XB lights. I'm fine with the factory looking single projector. The only downside and it's not morimoto's fault is the little slits that the Grand Cherokee calls headlights. There is very little dispersion and a fine line indeed between the light being too high and blinding oncoming traffic and too low. Or you're only seeing about 10 ft in front of the car. I'm talking. It doesn't even illuminate road signs. Again. Not morimoto's fault. Install was straightforward. I'm running them just with the sequential white LED. I don't want it to look funky or non-factory. These have sort of a quasi smoke lens. They give the Jeep front grill very factory and aggressive look. I found that installing the halogen fog lights cured the dispersion problem. I run them a bit higher so they project farther down the road. And then that pretty much lights up all the road signs and everything for about a good half mile or mile away. So if you're going to put these on your Grand Cherokee, I recommend buying both the fog lamp and the headlight together. They are indeed bright. It's as I mentioned the slits that Grand Cherokee uses for headlights. I spent about a week adjusting them and without the fogs installed at the same time, it really doesn't do much more than make a super bright spot in front of your Jeep with zero dispersion. I found that fine line not adjusting them against the garage door but by actually putting it on the road and finding that super fine. Razor edge where you get a little bit of light diffusion. The fogs are out of this world. Lighting up those dark corners well down the road. Whatever you do, don't discard your factory lights. That is your factory fog light housing or mounting gimbal. That is that gimbal or mounting frame is required to install the fog lights. You'll find that as adjusted because of super conservative factory lighting parameters. They're wholly inadequate these fog light laser beams. I ran them up about halfway up that threaded shaft. It was perfect. Nobody's flashed me at as far as our oncoming traffic. Unfortunately once they're installed the only adjustment you can access are the beam up and beam down. Don't quote me but I believe the driver side adjuster is turn it right to raise it. Passenger side headlight adjustment is left to raise it.

It eas pretty easy to install and was plug and play. Love how they look and perform just one small gripe. It's taking a while for the drl to turn off after my truck is turned off. How can I fix this?

These are nice lights. I’m glad i got them. Only problem was one of the connectors didn't fit. I had to spend 5 hours on youtube to find what had to be ground down to make it fit. Technical support said to push harder - that was never going to work. I compared the old and new connectors and it was obvious what needed to be done. Once i got the grinder out, it fit fine.

I use Morimoto for all of my vehicle’s lighting (2015 RAM 1500 Sport). The performance and aesthetic is bar-none the best. Aside from that though, I had to process two returns; One for mirror lights which became damaged, and a set of faulty headlights. That being said, the process both times was not only fast, but a pleasurable experience. The 5 year warranty claim is a real game changer. Planning on getting the grill next. Wish they had a military or law enforcement discount though.

I would give them 5 stars but I had a new headlight fail (45 days old). However they handled it very professionally & fast. Had to pay for the replacement until they received the defective headlight. I understand as im sure they have gotten burned before. Shipped replacement the same day & issued refund promptly upon receiving the defective peice. Aside from the issue i had the products are well built & performe great. Will definitely purchase from them again.