R X R.
Issues with final surface texture.
I have bought this product 2 times in the past years and have had no issues with the coating surface or the coverage. Easily did 2 light coats with a little left over on 2 showers (Master and guest bath) with a great non-slip surface. This time I needed to recoat the 2' 10" x 4" 8" shower floor that my wife cleaned the coating off using a cordless brush scrubber after 2 years. After preparing the surface I did the first coat but I ran out of product covering only little more than 2/3rds of the surface on the second coat. I did not coat the 6 1" wide drain indentations. Luckily I had enough from the last years can to finish. Granted it could of been my application but my issue is there was a distinct difference between the 2 finishes. The older can from last year seems to have had a rougher surface than the newer can. It appears the "grit" was slightly larger in the older can. Not only can you feel the difference but looking really close you can actually see the difference between the 2 application areas. The surface in the guest shower that I did last year seems to have the rougher surface. Yes, this just my perspective. Not happy and I will consider a different product if I have to do this again. Yes, I took the cordless brush scrubber away from my wife.



