ECOS PaintsReviews of ecospaints.net

We found in our project which contained 1/8" oak plywood, 1/2" oak plywood and oak hardwood that the stain was not as appealing on the plywood as the hardwood. We could not get the stain to look satisfactory on the 1/8" at all and debatable on the 1/2". The hardwood was okay but we will have to go another route on this project.

1. Very poor coverage in light color paint - needed 4 or more coats. 2. No clean-up information on can. 3. Paint is thick and cannot be thinned (per can instructions), therefore cannot be sprayed and leaves brush marks. 4. Website does not allow adequate review of paint palette.

We purchased the Tile & Grout Sealer. I spoke with a man on the phone with questions about the product and he was very helpful and easy to talk with. We're not sure, however, that the product did what it was supposed to. The sealer was very easy to apply and didn't have a bad odor. Water still soaks into the grout, however, when it comes in contact with it so we assume that the sealer didn't actually seal the grout.

My fiance told me she wanted a no VOC product used on our new bed that I just built and that ECOS was the only suitable product to use. I objected a bit but of course gave in and bought a cople of quarts, at what I consider to be a way too high price. Anyway, after I think 4, or 5 coats the result was pretty good - personally I still prefer Shellac both for cost, dry time between coats and finish quality.