RainHarvest SystemsReviews of rainharvest.com

Delivery of my order was very fast, all products packed neatly and all were delivered as ordered. Thank you. It could not have been better.

I had a problem with a shipment and they took care of it right away. Actually, it wasn't their fault, the manufacturer had left something out of the box. Also, very helpful with questions.

After receiving four post/wall first flush diverter units, the first issue I had was the small-parts bags were all sliced open and the contents spilled loose in the larger box. I was able to sort out all the pieces but came up one spacer ring short. And one of the major components, a large end cap was cracked. I called the company and the pieces were sent in short order. The next issue concerns the spacer rings that hold the primary screens in position at the outlet end of the diverter. This ring is ill-fitting and awkward to install. Closing the bottom of the diverter requires attempting to center and stack the spacer ring and the primary filter on top of each other in the threaded end cap and then inserting all this into the threaded socket end hoping everything stays in line and centered so the filter and ring fit inside the threaded socket. The best solution to this problem would be to mold the spacer ring onto the bottom of the primary screen with a lip or detent that registers it in the center of the threaded end cap. The third issue concerns the assembly of the outlet end. The paperwork that comes with the post/wall mounted diverter kits make reference to the "attached 'Water Discharge Valve Assembly' drawing" which IS NOT attached or included. Fortunately, in my case, one of the four diverter kits was sent with paperwork for the In-Ground diverter installation (all the same pieces, just different paperwork) which DID include the Water Discharge Valve Assembly drawing. One other concern I have is the relative light weight of the upper pipe bracket. This narrow band of metal is sized for only small screws to hold it to the wall. Given that this system is designed for 12" schedule 40 PVC pipe (each foot of pipe weighing 10.3 lbs. plus almost 50 lbs. for the 6 gallons of water it will hold), my 3.5 foot diverters will weigh over 210 lbs. when full of water. Will these two screws, even long enough to go through the siding, sheathing and blocking between the studs, keep this 210+ lbs. from tipping away from the wall? Why couldn't this upper bracket be made with a back piece to lag screw into solid wood or extra blocking like the bottom bracket with a front piece that clips or fastens to the back piece after the diverter assembly is held in place?

I will be a long term customer

Purchased all my rainwater system filtration equipment from RainHarvest Systems. The purchase was seamless online, but when I had a product defect I was able to reach an actual person who made it right. That customer service is why I keep coming back.

Great customer service before and after purchasing the D110 unit

Easy transaction. Delivered quickly.

I have now installed 4 of the rain collectors in my yard. Due to the good rains the last few weeks here in California, they are completely full. The removable top makes it much easier to access water with a bucket if needed and for removing unwanted objects. The flow out of the spigots is fast for filling a bucket. A threaded end would have been nice so a hose could be attached. Hope to keep plants watered when dry season begins later this year.