Gutterglove IncReviews of gutterglove.com

They work great! Installed them on my shed and haven't had any problems with them. The seem to keep the debris out while allowing the water to flow freely.

I am 66 yrs young and Installed 100 ft in less than 10 hours. Recommend watching DIY videos in addition to gutter glove. My gutters extend well beyond edge of roof, gutter glove only shows flush install. Had 2 non tradition pieces that took one hour each or would have completed in only 8 hrs. Used paint stirrers to lift under roofing. Recommend also using hack saw to cut rather than snips. Very pleased.

I put these up to keep the sticks and leaves from my Honey Locust trees out. That worked well. Fairly easy to install once I figured out a good process. My roof is 12/12 so I ended up putting a pretty deep indent in the mesh to allow water collection. The indent is proving to also collect a very large amount of the mineral from the shingles, and dust from the nearby farmers, creating a little more maintenance than I had anticipated. The inside corners at the valleys is the biggest collector and plugs up the mesh creating spillover if not maintained frequently. An unanticipated benefit of keeping the leaves out of the gutters was a near extinction of Earwigs that used to migrate into the house, YAY. I'll see how long they last and see what problems it creates for the roofers the next time we have a hail related replacement.

I ordered two 92' boxes of the 6" style at the same time. They arrived on different days with both boxes showing rough handling during shipment. Many of the pieces had bent corners but this was fairly easily remedied with pliers. Cutting the mesh with sharp tin snips was easy but to cut the frames I used a 12" bolt cutter. These are much higher quality than my previous gutter guards an I expect them to last many years. My only suggestions are to offer them in more varied quantities (I had to order 184' while I only needed 160') and to improve the packaging to prevent damage in transit.

I had vinyl gutter guards on my house for years and while they kept the leaves out, they still let the maple seeds and smaller stuff in. Got tired of still having to clean gutters after installing those cheap guards. Just installed these on a detached garage and install was easy. Only issue I had was that stainless mesh was tough to trim and will try a new snips next time. Aluminum edges and mesh I eventually cut with a die grinder with ease. Just ordered 2 more cases do do the house.

Like these so much I am putting on a second house. First floor gutters done but there is some second floor gutters where I will need a better ladder, a helper and courage! Self tapping screws work like a charm. There is some art to inside and outside corners. First house they have been in place for a year. Only maintenance needed is to occasionally blow leaves and shingle grit off of them. I purchased a $40 gutter cleaner extension for my Stihl handheld blower which does the trick.

I love this product. We have 20 tall pine trees around our house. The amount of needles in the gutters is staggering. A few years ago I installed 24 feet of the product and haven’t had any needles since. I just finished installing 48 more feet on some of the balance of the house. I am so looking forward to more easy clean years. Thanks

Watched a couple videos. Went up easy. Thunderstorms are in the forecast tonight for a first test.