The product is more like moldable clay, something similar I have had be fore. Not comfortable for me.
Response from Mighty Plugs: The World's Finest EarplugsSep 12, 2016
Dear Larry:
ON THE CONTRARY !!!>>>>>It's for anyone & EVERYONE who wants to Block Out (( ALL )) SOUND !!!!!
Larry, our ultra-high blocking Beeswax earplug MUST be KNEADED or WORKED between one's fingers or hands for 15 seconds ( just prior to insertion ) to make the ear plugs soft and mouldable.
Then you insert them and you will notice that they are ESPECIALLY CONFORTABLE, you'll hardly feel them while they block out perfectly!!
Larry, this ear plug is TOO GOOD to not use. Try again, you'll be quite surprised!!
Please keep me informed for your success is IMPORTANT TO US !!!!
Most sincerely
Mary-customer service
RH
Radio H.
Did not work for me
These ear plugs were time consuming to prepare, not particularly comfortable to sleep with and did not block out my wife's snoring. Other plugs are far more effective.
Response from Mighty Plugs: The World's Finest EarplugsAug 28, 2016
Dear Radio Hound:
"Time consuming"??????? Hardly????
Yes, it does take 15-20 seconds of (kneading or working) between one's fingers to make the BEESWAX ear plugs (soft and mouldable), but the time it takes is worth it because they'll BLOCK OUT (( ALL )) her snoring!!!!!!
BUT>>>be sure to insert them to where they (( SEAL )) the ear canal; then they'll block out (( ALL )) HER SNORING!!!!!
Radio Hound: This is too good of an ear plug to give up on. Try again. It WORKS!!!!!
Most sincerely
Mary-customer service and a 14 year (very satisfied) nightly wearer to block out my partner's snoring
ME
Melissa
Doesn't block out snoring like advertised
Was quite disappointed as it doesn't block out my partners snoring.
Response from Mighty Plugs: The World's Finest EarplugsJun 27, 2016
Dear Melissa:
This magnificent ear plug WILL BLOCK IT (( ALL )) OUT!!!!>>>>> when you insert it so that it SEALS the ear canal.
Please follow the insertion instructions below and you'll hear nothing but SILENCE !!!
1. The very first time that the ear plugs are prepared for insertion, you take ONE ear plug at a time and (knead it or work it) thoroughly through your fingers or hands for at least 15 seconds to make it soft, moldable and to disburse the pure Lanolin throughout the ear plug.
2. Now that it is moldable, use the tip of your index finger and (push and flatten) the ear plug somewhat (firmly), IN & AGAINST your ear canal, until you feel a good SEAL. If it doesn't SEAL immediately, just keep your finger pressed against the ear plug for a few more seconds, and it will SEAL the ear canal, not protrude out from the ear and block out superbly.
3. Now take the other ear plug, prepare it the (same way and insert it exactly the same way) as the first ear plug. Now, you'll hear SILENCE!
Melissa, please feel free to call our office at 1-800-226-1884, and we will walk you through over the phone on how to insert these magnificent ultra-high blocking ear plugs. All of us in our office where them for the same reason as you need them; and THEY WORK WONDERFULLY!!!
Most Sincerely,
Mary – BPI Customer Service
NC
NIRMALA C.
very noisy
can still hear loud music
Response from Mighty Plugs: The World's Finest EarplugsJun 25, 2016
Dear Nirmala:
Please insert our ear plugs to where they are SEALING your ear canals. Then you'll hear SILENCE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Nirmala, Please, follow the instructions below EXACTLY and they will block out everything including loud music!!!
1. The very first time that the ear plugs are prepared for insertion, you take ONE ear plug at a time and (knead it or work it) thoroughly through your fingers or hands for at least 15 seconds to make it soft, moldable and to disburse the pure Lanolin throughout the ear plug.
2. Now that it is moldable, use the tip of your index finger and (push and flatten) the ear plug somewhat (firmly), IN & AGAINST your ear canal, until you feel a good SEAL. If it doesn't SEAL immediately, just keep your finger pressed against the ear plug for a few more seconds, and it will SEAL the ear canal, not protrude out from the ear and block out superbly.
3. Now take the other ear plug, prepare it the (same way and insert it exactly the same way) as the first ear plug. Now, you'll hear SILENCE!
Nirmala, if you need our help; then please feel free to call our office at 1-800-226-1884, and we will walk you through over the phone on how to insert these magnificent ultra-high blocking earplugs. All of us in our office where them too and THEY WORK WONDERFULLY!!!
Most Sincerely,
Sally – BPI Customer Service
LB
Lorraine B.
Still snoring.
My husband snoring is still the same with these plugs. Sorry
Response from Mighty Plugs: The World's Finest EarplugsMay 10, 2016
Dear Lorraine:
If you insert them correctly, you can BLOCK IT (( ALL )) OUT !!!
Push the softened ear plugs (a bit more firmly) in and against your ear opening UNTIL they (( SEAL )) THE EAR CANALS !!!
Now listen, to nothing but SILENCE !!!!!!!!!!!!!!!!!!!!!!!!!
Most sincerely
Mary-customer service and a 12 year wearer for the same application>>> SNORING--LOUD SNORING TOO!!
DW
DW
Did not block out noise as advertised
Contrary to what I had read about these ear plugs blocking out everything including bass from loud music, I found my experience to be the opposite. Wish I could say my experience has been satisfactory, however, it has been comparable to sticking cotton balls in my ears.
Response from Mighty Plugs: The World's Finest EarplugsMay 3, 2016
Dear DW:
On the contrary !!! Our ear plug will block out (ALL) the noise; even better than advertised !!!.
D.W. If you don't insert our soft and moldable Beeswax ear plug CORRECTLY to where it SEALS the ear canal, then it will be just slightly better at blocking out than cotton balls.
Please see the video on our website OR read the instruction card that came with your order or BETTER YET; please follow the instructions in the following sentences and DW you'll change your mind and "sing us praise"!!!
1. The very first time that the ear plugs are prepared for insertion, you take ONE ear plug at a time and (knead it or work it) thoroughly through your fingers or hands for at least 15 seconds to make it soft, moldable and to disburse the pure Lanolin throughout the ear plug.
2. Now that it is moldable, use the tip of your index finger and (push and flatten) the ear plug somewhat (firmly), IN & AGAINST your ear canal, until you feel a good SEAL. If it doesn't SEAL immediately, just keep your finger pressed against the ear plug for a few more seconds, and it will SEAL the ear canal, not protrude out from the ear and it will block out superbly.
3. Now take the other ear plug, prepare it the (same way) and insert it (exactly the same way) as the first ear plug.
Now, listen to the SILENCE!!!
Most sincerely
Mary-customer service
AL
Alex L.
Need improvement.
Painful when placing, and need improvement in blocking sound. The adds and claims about the earplugs are a bit exaggerated. There is no real difference to normal earplugs in regards to sound blocking.
Response from Mighty Plugs: The World's Finest EarplugsApr 4, 2016
Oh Alex:
On the contrary!!! They need nothing for they are already magnificent !!! You didn't read the preparation instructions and you didn't knead the ear plugs first.
Alex, our (ultra-high) blocking Beeswax ear plug is so SOFT & MOLDABLE, that is is regarded worldwide as the MOST COMFORTABLE ear plug in existence,
but>>>>>being Beeswax, one has to first (work or knead) the ear plugs for 15 seconds just prior to insertion, to make them (soft and moldable).
and secondly, one needs to insert the ear plugs CORRECTLY to where they totally SEAL the ear canals !!! Once done, you will be wearing the HIGHEST BLOCKING ear plugs IN THE WORLD (and you'll know it immediately ) !!!!!!!!!!
Alex, please follow the directions on the card that came with your order and please read and follow exactly the directions below.
1. The very first time that the ear plugs are prepared for insertion, you take ONE ear plug at a time and (knead it or work it) thoroughly through your fingers or hands for at least 20 seconds to make it soft, moldable and to disburse the pure Lanolin throughout the ear plug.
2. Now that it is moldable, use the tip of your index finger and (push and flatten) the ear plug somewhat (firmly), IN & AGAINST your ear canal, until you feel a good SEAL. If it doesn't SEAL immediately, just keep your finger pressed against the ear plug for a few more seconds, and it will SEAL the ear canal, not protrude out from the ear and block out SUPERBLY !!!
3. Now take the other ear plug, prepare it the (same way) and insert it ( exactly ) the same way as the first ear plug.
Alex, we are with you (all the way), so if you still need our help in any way; then please feel free to call our office at 1-800-226-1884, and we will walk you through over the phone on how to insert these magnificent ultra-high blocking earplugs. We wear them too. WE KNOW They WORK GREAT and BLOCK OUT MAGNIFICENTLY!!!
Most sincerely
Peter-customer service
DP
Derek P.
Not all they are cracked up to be.
My girlfriend says they were uncomfortable and she could still hear my snoring.
Very disappointed with this purchase.
Response from Mighty Plugs: The World's Finest EarplugsMar 29, 2016
Dear Derek:
You both have got a pleasant surprise in store !!!
They're much much much better than you've experienced. Here's what to do to prove it !!!
Derek, first of all, please have your girlfriend (pinch off) about 1/3rd of the ear plug and insert the remaining 2/3rds. It is obvious that the ear plug is (too large) for her ear canal.
Secondly, please have her follow the instructions below (exactly) for preparing & inserting the ear plugs. When she does so, she'll see; they will block out ALL YOUR SNORING !!!
1. The very first time that the ear plugs are prepared for insertion, you take ONE ear plug at a time and (knead it or work it) thoroughly through your fingers or hands for at least 20 seconds to make it soft, moldable and to disburse the pure Lanolin throughout the ear plug.
2. Now that it is moldable, use the tip of your index finger and (push and flatten) the ear plug somewhat (firmly), IN & AGAINST your ear canal, until you feel a good SEAL. If it doesn't SEAL immediately, just keep your finger pressed against the ear plug for a few more seconds, and it will SEAL the ear canal, not protrude out from the ear and block out superbly.
3. Now take the other ear plug, prepare it the (same way and insert it exactly the same way) as the first ear plug.
Derek, if she needs our help; then please feel free to call our office at 1-800-226-1884, and we will even walk her through over the phone on how to install these magnificent ultra-high blocking earplugs.
We wear them too for the same reason, and we can easily describe to her how to insert them perfectly. THEY WORK GREAT !!!
Kind regards,
Mary – BPI Customer Service
